# Products
Our machines
| Model | Width (m) | Weight (kg)* | Power demand (HP) | No. of discs (pcs) | Performance (ha/h) | Working depth max (cm) |
|---|---|---|---|---|---|---|
| BTC30 | 3.0 | 1900 | 120 - 150 | 24 | 2.0 - 3.0 | 14 |
| BTC40H | 4.0 | 2850 | 130 - 160 | 32 | 2.8 - 4.8 | 14 |
| BTC50H | 5.0 | 3400 | 160 - 200 | 40 | 3.5 - 6.0 | 14 |
| BTC60H | 6.0 | 3900 | 200 - 250 | 48 | 4.2 - 7.2 | 14 |
* The given weight is approximate and may differ from the actual one, depending on the equipment and configuration.
MOUNTED HEAVY DISC HARROW
BTC disc harrows are machines designed for difficult tasks. They are efficient with low fuel consumption. BTC harrows are great at stubble cultivations with a large amount of crop residues, as well as restoring fallow land for cultivation.
LATERAL DISC SCREENS
The active screen located on the edge of both disc sections, works well even when working at great depths. Placing disc screens on a bearing axis does not allow the screen to be blocked by pressing earth lumps. In the event of excessive depression or a large obstacle, the screen holders are attached to the frame with floating connections, allowing the screens to tilt up during a collision. So you don't have to adjust the screen, it adjusts itself to the conditions.
MAINTENANCE-FREE HUBS WITH CASSETTE SEAL
Is daily maintenance required for your old machine too much time and attention? It's time you forget about frequent lubrication of bearings. Our disc harrows are standard equipped with maintenance-free hubs, in the heart of which work bearings identical to those used in the automotive industry. The entire system is protected with cartridge sealers, which are most effective in harsh field work..
OPTIMUM DISK GEOMETRY
The rake angle and the cutting angle of the discs suitable for high working speeds allow the user to obtain the fullest possible effect of mixing crop residues with the soil in the working depth range from 3 cm to 16 cm with a standard disc diameter of 620 mm. It is not the machine that determines job opportunities! You set the limits!
RUBBER PROTECTION 40x210 MM
Each plate is mounted on an individual holder in a system of four rubber shock absorbers. They effectively protect the plates against damage. The shock absorbers also reduce vibrations transmitted to the machine. Work without worry, without breaks![]()
ROLLERS WITH HOLDERS:
TUBE ROLLER (DIAMETER 600 MM
RUBBER ROLLER WITH CLEANERS (DIAMETER 560 MM) 2020 VERSION
FLEXI RING ROLLER (DIAMETER 600 MM, 60X10 MM)
STANDARD CLEANERS FOR FLEXI RING ROLLER (DIAMETER 600 MM, 60X10 MM)
CRACKER ROLLER WITH CLEANERS(DIAMETER 600 MM)
DOUBLE ROLLER(400 MM CAGE ROLLER + 400 MM TUBE ROLLER) 2022 VERSION
DOUBLE ROLLER (500 MM TUBE ROLLER + 400 MM CAGE ROLLER) 2022 VERSION
DOUBLE ROLLER(2X500 MM C-RING ROLLER) 2022 VERSION
C-RING ROLLER (DIAMETER 600 MM) WITHOUT CLEANERS
V-RING ROLLER (DIAMETER 600 MM) WITHOUT CLEANERS
T-RING ROLLER (DIAMETER 600 MM) WITHOUT CLEANERS
STANDARD CLEANERS(FOR T-RING,V-RING ROLLER AND C-RING ROLLER)
CHAIN CLEANERS FOR T-RING,V-RING ROLLER AND C-RING ROLLER)
HYDRAULIC SHAFT ADJUSTMENT
The system of the locking pins of the arm position of the rear roller due to which the working depth of the machine is adjusted can be additionally equipped with the system of the supporting hydraulic cylinders at any time. In this version the working depth of the machine is adjusted in a comfortable manner by controlling the hydraulic system from the tractor cabin.
