# Products
Our machines
Model | Width (m) | Weight (kg)* | Power demand (HP) | No. of furrows (pcs) | Performance (ha/h) | Working depth max (cm) |
---|---|---|---|---|---|---|
COLT30 | 3.0 | 1460 | 100 | 24 | 2.0 - 3.2 | 14 |
* The given weight is approximate and may differ from the actual one, depending on the equipment and configuration.
SEMI-MOUNTED DISC HARROW
COLT series disc harrows are compact and light semi-mounted machines. They are perfect for intensive and quick stubble cultivation. They are efficient with low fuel consumption at the same time. COLT harrows are great for dealing with stubble with a lot of crop residues, as well as for restoring fallow land for cultivation. They are a universal tool that can be used to prepare the soil for sowing. Due to its design, the power requirement is no more than 100 HP.
HYDRAULIC ADJUSTMENT OF WORKING DEPTH
RUBBER PROTECTION 35x180 MM
Each plate is mounted on an individual holder with a system of four rubber shock absorbers. Thanks to the protection, the user can safely operate the disc harrow even in difficult field conditions, while being sure that the machine is solidly protected against possible damage.
WHEELS 10/80-12
SIDE SCREENS
Active screens located at the edge of both disc sections limit the zone of soil deposited by the edge discs, preventing the formation of ruts at the crossing connections. In the event of excessive recess or encountering a large obstacle, the screen holders are attached to the frame using floating joints, allowing the screens to tilt upwards in the event of a collision.
SPACE BETWEEN ROWS OF PLATES 85 CM
TWO ROWS OF 510 MM OR 560 MM "C" TYPE PLATES WITH DOUBLE ARM
The angle of attack and cutting angle of the discs suitable for high working speeds allows the user to obtain the fullest possible effect of mixing crop residues with the soil in the working depth range from 3 cm to 14 cm with a standard disc diameter of 560 mm. It is not the machine that determines work opportunities! You set the boundaries!
MAINTENANCE-FREE HUBS WITH CASSETTE SEAL
Does the daily maintenance of your old machine require too much time and attention? It's time to forget about frequent lubrication of bearings. Our disc harrows are standardly equipped with maintenance-free hubs with bearings identical to those used in the automotive industry. The entire system is sealed using cassette sealants, the most effective in difficult field work conditions.