# Products
Our machines
Model | Width (m) | Weight (kg)* | Power demand (HP) | No. of discs (pcs) | Performance (ha/h) | Working depth max (cm) |
---|---|---|---|---|---|---|
BT25 | 2.5 | 1180 | 85 - 115 | 20 | 1.50 - 3.00 | 14 |
BT27 | 2.7 | 1180 | 90 - 120 | 22 | 1.89 - 3.24 | 14 |
BT30 | 3.0 | 1320 | 100 - 130 | 24 | 2.10 - 3.60 | 14 |
BT35 | 3.5 | 1320 | 105 - 140 | 28 | 2.45 - 4.20 | 14 |
BT40 | 4.0 | 1750 | 110 - 150 | 32 | 2.80 - 4.80 | 14 |
BT40H | 4.0 | 2250 | 120 - 150 | 32 | 2.80 - 4.80 | 14 |
BT50H | 5.0 | 2600 | 140 - 180 | 40 | 3.50 - 6.00 | 14 |
BT60H | 6.0 | 3100 | 160 - 200 | 48 | 4.20 - 7.20 | 14 |
* The given weight is approximate and may differ from the actual one, depending on the equipment and configuration.
DISC HARROW
Disc harrows of the BT series are machines designed for difficult tasks. Working widths of up to 6 meters and optional transport equipment are ideal for intensive and fast stubble cultivation. They are efficient with low fuel consumption. BT harrows are great at stubble cultivations with a lot of crop residues, as well as restoring fallow land for cultivation.
SIDE SCREENS
Active screens located on the edge of both disc sections limit the soil deposition zone by the outer discs, preventing rutting at the junction of passages. In the event of excessive depression or a large obstacle, the screen holders are attached to the frame with floating connections, allowing the screens to tilt up during a collision. So you don't have to adjust the screen, it adjusts itself to the conditions. In addition, you can adjust its depth and longitudinal position.
RUBBER PROTECTION 35x210 MM
Each plate is mounted on an individual holder in a system of four rubber shock absorbers. They effectively protect the plates against damage. The shock absorbers also reduce vibrations transmitted to the machine. Work without worry, without breaks.
MAINTENANCE-FREE HUBS WITH CASSETTE SEAL
Does the daily maintenance of your old machine demand too much time and attention? It's time to forget about frequent bearing lubrication. Our disc harrows come standard with maintenance-free hubs, housing bearings identical to those used in the automotive industry. The entire system is sealed with cassette seals, proven to be highly effective in demanding field conditions.
TWO ROWS OF PLATES
The rake angle and the cutting angle of the discs suitable for high working speeds allow the user to obtain the fullest possible effect of mixing crop residues with the soil in the working depth range from 3 cm to 14 cm with a standard disc diameter of 560 mm. It is not the machine that determines job opportunities! You set the limits!